For some reason plots are now showing up in the original post (http://3dimensionaldesigningandmanufacturing.blogspot.com/2015/07/comparison-between-lift-and-drag.html).
I write about Propulsion, Aerodynamics and Renewable Energy (Wind/Hydro Turbines).
Showing posts with label Machine Design. Show all posts
Showing posts with label Machine Design. Show all posts
Sunday, 5 July 2015
Plots for Comparison between Lift and Drag Produced by a Legacy Wing VS a Wing with Tubercles (Humpback Whale Fin's Inspired)
Labels:
aero foil,
airfoil,
CAD,
CAE,
Drag,
FEA,
gas turbine,
Green,
Green Energy,
Machine Design,
Mechanical,
Mechanical Engineering,
Parametric Cycle Analysis,
Simulation,
SolidWorks,
stagnation,
Stress
Sunday, 15 September 2013
Compressor Blade
Compressor Blade Replica
This is another of my CAD models for sale, it is a profile of compressor blade.
It uses Selig/Giguere SG6041 airfoil. Chord length is 3 in. and span is 5 in. Angle of twist is 20 degrees. excellent for 3D Printing. You can use it as a decoration piece as well if you are an aviation enthusiast like me!
Pricing
SolidWorks 2011 Part File $35 (PKR 3,500)
SolidWorks 2013 Part File $30 (PKR 3,000)
SolidWorks 2013 Part File $30 (PKR 3,000)
IGES/STEP File $70 (PKR 7,000)
STL File $10 (PKR 1,000)
DWG File AutoCAD 2007 $20 (PKR 2,000)
DWG File AutoCAD 2013 $15 (PKR 1,500)
Renderings
With White Back Ground, 1366 x 626, 64 Ray Bounces, Maximum Shadow Quality, Ground Illumination, Global Illumination, Self Shadows, Ground Shadows and Ground Reflections.
$2.5 (PKR 250) Each (167 PPI at 9 in Diagonal) with at least 1 part file.
$10 (PKR 1,000) Each (167 PPI at 9 in Diagonal) only renders.
Custom Back Ground add $5 per render.
Special discount for students enrolled in degree programs!
Special discount for students enrolled in degree programs!
Render 01
Render 02
Render 03
For purchase or suggest, send an email to fadoobaba@live.com , tweet @fadoobaba, PM at https://www.facebook.com/ThreeDimensionalDesign or https://grabcad.com/fahad.rafi.butt or comment with your contact details and I will contact you!. Thank you for reading!
Do comment and share!
Labels:
2013,
3d Printing,
aero foil,
airfoil,
AutoCAD,
Autodesk,
blade,
CFD,
chord,
compressor,
compressor blade,
flight,
gas turbine,
IGES,
Machine Design,
SIM 360,
Simulation,
STEP,
STL,
turbine gas
Thursday, 12 September 2013
The Work-Station
Work Station Specifications
In this post I will post my current computer specifications and current related software I have installed.
The Hardware
Intel® Core™ i5-750 (8M Cache, 4 x 2.66 GHz, 3.2 GHz with Turbo) + Intel® DP55WB.
I chose this processor because it's a quad core, and it has a lot of cache, and it was within the budget, very very important for renderings and simulation modeling applications, like Simulation Premium. The motherboard is one thing that should be strong and should have lots of expansion options, this was the best available within my budget so I went for it, it has 4 RAM slots (4GB/slot) and PCI-e slot (for graphics card), both very important for CAD and rendering applications.
Kingston® 10 GB (1 x KVR1333D3N9/2G + 2 x KVR1333D3N9/4G).
Now when I bought it, I had 2 GB of RAM installed, then gradually up graded to 10 GB, plans are in motion for 4 GB more. RAM is important for FEA, specially for generating matrices, for renderings for iterations and for gaming too.
MSI® AMD® Radeon™ HD6770 (MD1GD5)
The original build had NVidia® GeForce™ GT 240 installed, it got burned. So this current card was the replacement. and I have to say it is very smooth in performance.
Seagate® Barracuda™ 7200 rpm 500 GB
Hard disk is not so much important in CAD work, as designs of single parts may never exceed 500 MB in size, usually stay below 50 MB, so I saved some money and went for 500 GB instead of more.
Intel® 2.1 Channel
The audio is of absolutely no use in CAD and related fields, so I prefer not to waste money on 3rd party sound cards, and go for built-in solution by Intel.
Dell® E1910H
High resolution monitors are icing on the cake, really, in CAD related applications, but are costly, so I chose this one from Dell, it has a maximum resolution of 1366*768 which is fairly good for work and gaming too on a budget.
A4Tech® X6-10D
Mouse is of extreme importance as its your primary input device, machine design and CAD are tough fields and require a lot of concentration, long hours and hard work, so have a nice mouse so that it works smoothly and dose not divert you attention, choose a mouse with high DPI for CAD applications, such as AutoCAD, 1000+ DPI recommended.
Dell® RT7D60
Keyboard must have soft keys, if you plan on using keyboard shortcuts for CAD and long hours of work. This is one thing I will change soon.
Cooler Master® Extreme Power Plus 460W
Good power supply keeps your graphic card and processor at full power and prevent overall system temperature from rising. So spend some money on 3rd party power supply must.
APC 1.5 KVA UPS (as backup power)
You know! Electric power cuts in Pakistan :)
Labels:
3d Printing,
AMD,
ati,
Autodesk,
core,
Engineering,
FEA,
IGES,
Intel,
Machine Design,
MATLAB,
Mechanical,
Mechanical Engineering,
Microsoft,
radeon,
Solid Edge,
Solid Works,
SolidWorks,
STEP
Introduction!
Three Dimensional Designing and Manufacturing
In this post, I will briefly introduce you to my firm.
First and foremost, who am I?
Well I am a Mechanical
engineer trying to start a design/prototyping company based in
Rawalpindi, Pakistan. For now I do not exist physically i.e. I do not have an
office. I communicate via web based means only.
The Mission
My goal is to provide you with state of the art CAD, CAM and CAE services. These include
full variety of machine design parts and assemblies, architecture plans, simulation
analysis, fluid dynamics analysis etc.
My Working Mediums
My main working
medium is in three dimension, I can also make ISO 129 2D drafts and
sketches. Following are the software in which I have expertise.
3D
Dassault SolidWorks
20xx Premium*, Siemens Solid Edge, Autodesk Inventor Student Professional 201x
2D/Drafting
Dassault SolidWorks 20xx Premium*, Autodesk
AutoCAD Student Professional 20xx, GStarCAD
CAM
MasterCAM x5,
CAMWorks 20xx
Design Validation/Simulation:
Autodesk SIM 360; Dassault SolidWorks Simulation Premium
20xx*, SolidWorks Flow Simulation Premium*, SolidWorks Sustainability* and
SolidWorks Motion*
Coding
Math-Works
MATLAB 201x, Microsoft Visual C++ (related to Mechanical Engineering only)
I can also provide complete
support/supply for IGES/STEP formats. STL files also available for additive
manufacturing process.
Contact and work demonstration
You can check out my existing designs/contact me for you own custom design orders via Facebook at https://www.facebook.com/ThreeDimensionalDesign, via GrabCAD at http://grabcad.com/fahad.rafi.butt, and via comments below! awaiting for your response!
Notes
* (CSWP/CSWA Trained)
Labels:
3DPrinting,
AutoCAD,
Autodesk,
c++,
CAD,
CAE,
CAM,
CFD,
Engineering,
FEA,
IGES,
Machine Design,
MATLAB,
Mechanical,
Mechanical Engineering,
Solid Edge,
Solid Works,
SolidWorks,
STEP
Subscribe to:
Posts (Atom)